V-LEDS Project Scion iQ DRL Installation

Posted: February 20, 2012 in How to:, Products, Project Vehicles
Tags: , , , , ,

Introducing the V-LEDS Scion iQ. This little car is amazing in many ways. From being fuel efficient and fun to drive, to being completely different from the majority of the cars on the road. The Scion iQ is a hit. After looking this little car over we thought it would make a great addition to the family of V-LEDS cars. We noticed, like all Scions, it is a great vehicle ready for upgrades. We will continually update all the mods we do right here on the blog.

V-LEDS 2011 Scion iQ with DRL_3W_W_6K Installed as DRL.

Lets start with the addition of one of our latest products, the DRL_3W_W_6K. These LEDs are sealed units that house a 3 chip, 3 watt diode. Ideal for use as a DRL (daytime running light) or accent lighting. These things are bright! We installed a total of 10 of these, 5 on each side, on the trim panel next to the fog lamps. We wired them to ignition power so they turn on whenever the car is on. In addition, we also wired in a relay harness. The harness is wired into the fog lamp circuit, it turns the DRL LEDs off whenever the fog lights are in use.  These LEDs are impressive! They are bright, even in direct midday sunlight. They are so bright that they cast light onto the ground as well as you can see in the photo.

Installation of these lights is pretty straight forward. If you have some basic tools and wiring knowledge you can create a completely new look for your car or truck in an afternoon. Is this a look you want for your car? Here is where you can find the product on VLEDS website: DRL_3W_W_6K  After you click the link you will land on the product page. You will need to know how many of these you need. They are sold individually, as 1 EACH. On our Scion iQ we used a total of 10 each.

First lets take a look at what you need:

An electric drill with various sized drill bits

Tools for wiring; crimpers, solder iron, test light etc.

Wiring accessories; wire, zip ties, crimp terminals, loom etc.

For our Scion iQ we chose the lower fog lamp area to install these LEDs. We removed the plastic trim panels and found that they were perfect for mounting these LEDs to. The fog lamps are optional on the iQ. This location will work regardless if it has fog lamps or not.

Here are some pictures of the installation process:

Drill a 3/16 hole to mount the DRL LED

After locating and marking where you want to install the LEDs use a 3/16 drill bit to make a hole. (A little side note: after you have drilled your ALL the holes snap this cover back on the car and drill holes in the plastic of the bumper too. This allows for the wires to pass through the bumper for easy wiring.)

Routing wires through drilled hole.

Next, route the wires from through the hole and insert the threaded mount into the hole. Use the supplied nut to secure the LED to the mounting surface.

Routing wiring through bumper

After you have located, drilled, and installed all of the LEDs you will need to route all of the wiring through the plastic of the bumper. Here is where the tip from up above comes in handy.

All wiring is routed and ready to be connected to the car.

After the wiring was routed through the bumper we covered it in some loom. We also have 9006 style connector ends in our shop, so we went ahead and crimped some of these on the wiring. The ends made for a direct plug into the relay harness we installed. (Installation note: the Red wire is 12 V positive+ and the White wire is Ground-)

DRL lights on.

After finalizing all the connections we were ready to test the lights. They are pretty bright, this made it troublesome to get a quality picture.

We offer these lights in 3 colors. 6K White, Amber, and Red. You can find them here on VLEDS.com:

DRL_3W_W_6K  To be used as a DRL, Fog, or auxiliary light. The possibilities are endless.

DRL_3W_A  To be used as a blinker or Amber DRL.

DRL_3W_R  To be used as an auxiliary brake light.

Thanks for reading. If you have questions regarding this product please send an email to our customer service department at sales@v-leds.com. We are quick to respond via email and can answer any questions you may have about our products.

Here are some more photos of our Scion iQ.

Comments are closed.