V-LEDS High Power Platinum Edition LEDs

Posted: November 25, 2011 in Products
Tags: , , , , , ,

V-LEDS Platinum Edition High Power 20

Here at V-LEDS we pride ourselves on developing the latest in cutting edge LED technology for your car. The latest addition to our extensive assortment of LEDs is the Platinum Series High Power 20. This bulb features years of development and testing brought together to form the perfect combination of light output and aesthetic appeal. This V-LEDS product is overbuilt to deal with the most demanding of applications. From Daytime Running Lights to Brake lights, this LED can do it without problems. Thick aluminum circuit boards and a large machined heat-sink located at the top of the LED quickly dissipate the heat generated by the .5 watt diodes. Clear lenses with vent slots add to the finished look of the bulb. Each .5 watt diode, 20 total, make for an intense blast of light aimed directly into your cars reflective lenses for the brightest output available on the market today.

The Evolution Of The High Power 20 Bulb

The Design of the High Power 20 LED bulbs started years ago. There was missing product in the 7440/7443 category. Everything we tried was just not bright enough. We needed to do something completely different to achieve acceptable levels of light output. After designing different prototypes a decision was made to use different diodes. The .5 watt diode was realized as the best candidate for the job. These diodes pack a serious punch. Each .5 watt diode has the same light output of 10 of our standard diodes. They also create 10 times more heat than the standard diodes. Heat is an LEDs worst enemy and we needed to develop a means to dissipate the large amounts of  heat generated by these new diodes. This led to another technological innovation by V-LEDS, the aluminum circuit board. This allowed the full power use of the .5 watt diode in brake light applications. This technology is applied to all High Power .5 watt LEDs offered by V-LEDS. The first edition of the High Power 20 used 14 .5 watt diodes on the sides and 6 of our standard 1210 diodes on the top. This design was hugely popular, so popular in fact that we continued development all the way up to the current Platinum Series. As we continued to advance this product we knew it needed to be brighter and even more capable of dissipating the heat of the .5 watt diodes. The 3rd Generation of this LED was equipped with massive aluminum circuit boards to handle the increased power output of the LEDs. The 6 standard 1210 diodes on the top were replaced with 4 .5 watt diodes to get as much light output as possible. This bulb packed a serious punch, but the finished look of the bulb left something to be desired. Which is where the Platinum Series steps in. A few tweaks in diode placement and heat management combined with its vented lens and voilà. Stay tuned in to V-LEDS to see where we take this already amazing product. Can we make it any better than it is now? That was the same question we asked ourselves a few years ago and the answer is YES, YES we can! Check out the progression of photos; 2nd, 3rd and Platinum Series from left to right. (The 1st Gen not pictured, It was a 48 LED version utilizing our standard 1210 diodes)

Comments
  1. […] V-LEDS High Power Platinum Edition LEDs […]