Have you ever needed to troubleshoot a problem with your electrical system and there is not a test light around? Do you have a little MacGyver in you? If so than this quick little invention can be a lifesaver if you’re stuck in the woods or the local auto parts store is closed and you need to get some work done. If you are working on your car you most likely have the necessary items laying in front of you. If you’re like me you usually have random tools and supplies hiding under the seat from the last time you worked on your car. Regardless, the only things you need to build this test light are a couple short lengths of wire, a dome light bulb and some electrical tape. (If you are in a bind you can use any bulb from your car and any tape will work)
The steps are easy. 1) Locate all the necessary items. 2) Strip 2 Inches of the sheathing off of the wires. 3) Wrap the bare wires around each end of the bulb. 4) Tape the wires in place and strip about 1/2″ of sheathing from the other end of the wire.
This thing is pretty simple to use. If you need to find +12 volts just hold one of the wires to ground and touch the other wire to the circuit that needs testing. If the light turns on you have power.
If you need to find a ground you can hold one wire to +12 volts and touch the other wire to ground. If the light turns on you have power.
Hopefully you remember this when you need it most. Or you could just buy a test light and keep it in your car just in case.
Thanks for reading. Be sure to share this with your friends, you never know who might be in need of a test light.
James the email@example.com